Analytical Chemistry
Analytical Chemistry: A Modern Approach to Analytical Science,
2nd edition by Robert Kellner, Jean-Michel Mermet, Matthias Otto,
Miguel Valcarcel, H. Michael Widmer (Wiley VCH) Why settle for less
when you can have the whole of Analytical Chemistry in a single
book?
The successful all-in-one guide to modern Analytical Chemistry is
now available in a new and updated edition. From the foundations of
analytical science to state-of-the art techniques and
instrumentation -- all you will ever need to know is explained here.
The text covers both general analytical chemistry and instrumental
analysis and may be used for most analytical chemistry courses
offered today.
Carefully chosen worked examples show how analytical problems can
effectively be solved and how calculations should be performed.
Study questions and recommended reading for further study are
provided for each learning unit.
The second edition has been carefully revised to keep up-to-date
with advances in the technology of analytical methods in the
laboratory and in the workplace, including newly written chapters on
multidimensional chromatography, sensors and screening systems.
With its broad scope, the text doubles as a reliable reference
for virtually all analytical problems encountered during the course
of study and beyond.
Excerpt: Analytical chemistry is – depending on the point of view
– the oldest as well as the youngest branch of chemistry, the
science of the transformation of matter. Claiming to be the oldest
branch of natural philosophy (as "chemistry" has been described)
goes back to the use of the Aristotelian syllogism for argumentation
and proof (as shown in his "Analytiken"). Claiming to be the
youngest branch became a possibility as "analytics" emerged as an
own scientific discipline based on application of modem knowledge
theories and information science in chemistry. The emancipation of
analytical chemistry from chemistry began with Robert Boyle,
continued with the activities of Lavoisier, Berzelius, Wöhler and
Liebig, culminated the first time 100 years ago with Wilhem Ostwald
(and his work Die wissenschaftlichen Grund-lagen der Analytischen
Chemie) and led to its present autonomy as a separate, very complex
and highly attractive branch of science, described in its
fundamentals in this book. The development of analytical chemistry
is still continuing at a dramatic rate: consider the dynamic impact
of Jan Heyrovsky (Electroanalysis), Richard R. Ernst (NMR), Gerhard
Binnig and Heinrich Rohrer (STM/AFM) to name just a few of today's
great researchers. As a consequence of the early and continuing
interest in this field, a wealth of empirical knowledge, both of
fundamental and of practical importance, about the material world in
and around us has been compiled.
Chemistry as a whole has evolved worldwide into a supporting
pillar of human culture, industry and trade, providing numerous
goods of urgent daily need for humankind, such as food, clothing,
shelter, pharmaceuticals and materials essential for medical use,
transport or communication. Purely empirical at first, and mainly a
branch of medicine, today's chemistry is a modem experimental
science under-pinned by physico-chemical and mathematical laws and
has itself diversified into organic chemistry, inorganic chemistry,
biochemistry, food chemistry, chemical technologies, physical
chemistry and lately analytical chemistry.
It is certainly true that modem analytical chemistry, with its
plethora of sensitive and selective techniques, has also strongly
contributed to the awareness of environmental problems and issues
and to the establishment of quality control systems in industrial
production, in the health area and in the environment. The world
market for analytical instruments has grown significantly over the
years into today's impressive 1000 billion US $ size. Under the
"responsible care" program of today's chemical industry, misuse of
unoptimized technologies will ultimately be banned. The principle of
"sustainable development" has been accepted as a basis of the
production philosophy of the major chemical companies in Europe and
is under consideration elsewhere. Analytical chemistry has been
given a decisive role in controlling the success of this process and
in preserving the ecological balance of our world today.
The Division of Analytical Chemistry (DAC) of the FECS
(Federation of European Chemical Societies) defines: "Analytical
chemistry is a scientific discipline that develops and applies
methods, instruments and strategies to obtain information on the
composition and nature of matter in space and time".
This textbook – besides its unique role in university education –
can also be considered as an interpretation of this DAC definition
of analytical chemistry and as a pillar of support of the fact that
analytical chemistry is indeed an own branch of science today – an
information science – answering the theoretically and practically
important question, how the material world is composed.
In order to find answers to this question, analytical chemists
use chemical, physical and biological reagents to interact with the
samples under investigation. This reagent-oriented view is also the
scheme adopted for this textbook for practical reasons. In some
cases the methods of analysis are clearly chemical, such as
acid-base titrations where chemical reagents are used exclusively or
purely physical, such as x-ray fluorescence. On the other hand the
reader will soon notice that in some cases there are no clear, sharp
differentiations, such as in chromatography, listed here under
"chemical analysis" or "scanning tunneling microscopy" which has
been linked to "physical analysis" although both areas touch both
chemical and physical aspects.
Analytical chemistry is an in-between-science using and depending
on the laws of chemistry, physics, mathematics, information science
and biology. Its aim is to decipher the information hidden in the
sample under investigation, not to change this intrinsic
information, hence to tell the truth about the composition of the
material world. This sounds trivial to a scientist, but it is not in
today's complex and complicated technical and environmental matrices
where analytical data frequently have to be made available in real
time and in situ (in the unchanged matrix). Pressing needs of modern
world trade, industry and commerce have led to the creation of
national – and more importantly – international bodies for quality
assurance, such as EURACHEM and CITAC. These bodies demand that
even experienced laboratories prove their technical competence by
passing accreditation procedures comprising both technological
standards and personal skills from time to time (see Chapter 3).
The worldwide training of analytical chemists in the analytical
skills and knowledge required to meet these challenges demands a
high level of education using a harmonized scientific language and
worldwide agreement on the basic scientific contents to be taught.
While English has today the unchallenged role as lingua franca in
chemistry and physics, the DAC-Curriculum "Analytical Chemistry" is
the first broadly accepted attempt to harmonize the basic curricula
in analytical chemistry for the benefit of the chemistry students
working under this scheme (see Anal. Chem. 1994, 66, 98A for the
basic part and Fres. J. Anal. Chem. 1997, 357, 197 for the advanced
part of the DAC-Curriculum).
This textbook Analytical Chemistry is the authentic version of
the DAC-Curriculum "Analytical Chemistry" and has emerged from the
former "WPAC-Eurocurriculum". Its concept is based on the balanced
mix of traditional methods of chemical analysis (Part II), modern
techniques of biological (also Part II) and physical analysis (Part
III) as well as chemometrics (Part IV). The textbook chapters in
Parts II to IV are preceded by an introductory Part I featuring
general topics such as "Aims of analytical chemistry and its
importance for society", "The analytical process" and "Quality
assurance and quality control". The book is completed by an
industrially relevant Part V "Total analysis systems" dealing with
more complex "Hyphenated techlniques" and "Process analysis systems"
of industrial importance today and, in particular, in the future.
It is a multiauthored book, in order to guarantee the highest level
of competence also in the undergraduate level of modern university
education. The book is devoted to the principle of combining solid
foundations of scientific knowledge with flexibility towards novel
analytical techniques. Its unique concept allows coverage of
classical topics, such as acid-base titrations or compleximetry –
which are necessary to understand modern chemical sensors technology
– while also including recent, trendsetting developments in physical
analysis, chemometrics and process analysis. For example, atomic
force microscopy and miniaturized total analysis systems (,u-TAS)
are introduced at an elementary level. Possible shortcuts in some
chapters have to be seen in the light of the editorial decision to
limit the size of the book to under 1000 pages and may be overcome
by referring to the wealth of specialized textbooks for advanced
studies that are part of the DAC-Curriculum scheme.
Besides providing chemistry students with a sound preparation for
the requirements of modern industry, university studies in
analytical chemistry must also pro-vide fitness in basic academic
research. Truth has an essential place in analytical chemistry. The
critical student should therefore carefully study Chapters 2 ("The
analytical process") and 3 ("Quality assurance and quality
control"). Sir Karl Pop-per's credo: "The approximation to the truth
is in principle possible" can be accepted as a strong philosophical
foundation of analytical chemistry as a basic science.
In the applied field, we are confronted with a worldwide flood of
analytical data, resulting from the incredible number of 10 000
million analyses per year! It is the attempt of this elementary
textbook and its editorial team to make dear that analytical
chemistry has today more than ever a sound responsibility for the
future development of our society.
Analytical data and model calculations on NOx production in the
stratosphere by supersonic jetliners, for instance, resulted in
knowledge which prevented the development of a significant fleet of
ozone-killing supersonic jets. This is just one example of our
necessity to produce correct analytical data and to transfer them
correctly into knowledge that we can use in problem solving. Correct
knowledge is also the basis for wisdom, needed for instance for far
reaching political decisions in general.
We are convinced, that when taught worldwide, analytical
chemistry – based on an educational scheme devoted to the
equilibrium between freedom and responsibility, as provided by this
textbook and the DAC-Curriculum – can be a key science to provide
for a safer future for mankind!
The first edition of this book has been published six years ago,
thanks to the initiative and considerable effort of Robert Kellner.
Four editors have been involved in the elaboration of this book,
written by internationally recognized and actively involved authors.
Unfortunately, just before the completion of the book, Robert
Kellner and Michael Widmer passed away.
When we had to discuss the possibility and necessity of updating
this book, it was, then, necessary to select a new editor for this
revised version, and it was very obvious for the two remaining
editors and our publisher, Wiley-VCH, that Prof. Miguel Valcárcel
was the most appropriate person. Miguel has a prestigious career in
analytical chemistry, a large experience in writing books, and is
currently the chairman of the Division of Analytical Chemistry (DAC)
of the Federation of European Chemical Societies. Besides, for quite
a long time he has been an advocate of a new approach for teaching
analytical chemistry.
Dean's Analytical Chemistry Handbook, 2nd Edition by Pradyot
Patnaik (McGraw-Hill Professional) A Most Useful Tool In Analytical
Chemistry:
This comprehensive, up-to-date reference offers chemists and
chemical engineers detailed coverage of the full range of analytical
methods, including all conventional wet and instrumental techniques.
It also provides information on the preliminary operations of
analysis, preliminary separation methods, quality control and
quality assurance, and statistics in chemical analysis. This
one-of-a-kind resource presents fundamental data on:
-
Volumetric and Gravimetric Analysis
-
Chromatographic Methods
-
Electronic Absorption and Luminescence Spectroscopy
-
Infrared and Raman Spectroscopy
-
Atomic Spectroscopy
-
Optical Activity and Rotary Dispersion
-
Refractometry
-
X-ray Methods
-
Radiochemical Methods
-
Nuclear Magnetic Resonance Spectroscopy and Electron Spin
Resonance
-
Mass Spectrometry
-
Electroanalytical Methods
-
Thermal Analysis
-
Magnetic Susceptibility
-
Organic Fundamental Analysis
-
Detection and Determination of Functional Groups in Organic
Compounds
-
Methods of Determination in Water
-
Geological and Inorganic Materials
-
Statistics in Chemical Analysis
-
Water Analysis
-
More
With New Chapters on:
-
Analysis of Indoor Air
-
Pesticide and Herbicide Analysis
-
Environmental Analysis Including Trace Updates on Processes,
Tools, and Techniques
The growth of modem technology has confronted the analytical
chemist with a host of new and increasingly complex materials, has
called on that person to provide information about constituents
previously unrecognized or ignored, and has posed more stringent
demands for greater sensitivity, reliability, and speed. On the
other hand, developments in instrumentation and the research of
colleagues in allied fields have provided the analyst with new
techniques, instruments, procedures, and reagents for dealing with
these problems.
This very expansion of equipment, reagents, and methodology has,
however, greatly complicated the task of the chemist searching for
the best way of attacking a new or unfamiliar sample. This handbook
is intended to provide analytical chemists and their colleagues in
related sciences with concise and convenient summaries of the
fundamental data and the practical procedures that are most
important and most useful among the conventional wet and
instrumental methods in modem analytical chemistry. All this is
presented in a convenient desk-size guide.
Without ready access to the data that describe the behaviors of
the various substances present toward different techniques, it is
all too easy for the special peculiarity of the one most suitable
technique to escape notice. One of the hardest problems in
analytical work is in choosing the right technique to solve a
problem. With this handbook the reader will have a handy reference
all in one place for analytical techniques. The handbook should be
especially helpful in those laboratories which may not have
developed a wide variety of in-house analytical methods.
Extensive application tables contain just enough information to
enable a reader to reach a judgement call about the possible
applicability and range or sensitivity of a method plug references
that will supply more detailed directions and discussion of the
method. Intercomparison of techniques within a general topical area
or between one or several topical areas are provided to enable the
user to reach a decision on choice of a method. Factors entering
into this decision might be cost, time of analysis, sensitivity,
reproducibility, and expertise required of the operator. As an aid
to understanding the parameters involved in a technique, many
examples involving mathematical expressions have been worked out.
Illustrative worked examples and troubleshooting sections are
included.
Sample preparation prior to analysis is a major analytical
challenge; the book expounds the various techniques for extracting
analytes from complex matrices and gives approaches to method
development. The opening section on preliminary operations of
analysis encompasses the important topics of sampling, mixing and
sample reduction, moisture and drying, and methods for dissolving
the sample. More than likely a preliminary separation will be
necessary, perhaps to concentrate the analyte or to remove
interference, or both. Preliminary separation methods take the
reader through complex formation, masking and demasking reactions,
extraction methods, ion-exchange methods, volatilization methods,
and conclude with carrier coprecipitation and chemical reduction
methods.
Traditional material in the realm of gravimetric and volumetric
analysis constitutes the third section. Here are discussed inorganic
gravimetric analysis, acid-base titrations in aqueous media and in
non-aqueous media, precipitation titrations, oxidation-reduction
titrations, and complexometric titrations. The remainder of the book
treats the individual areas of instrumental analysis and a selected
group of applications. A final section contains information of a
general nature.
Although there is no specific section on methods for the analysis
of technical materials, the Index is expanded to include references
to specific elements or functional groups, and to types of sample
matrices, that are tabulated in the many tables within the various
sections of the handbook. This style eliminates unnecessary
duplication of material.
In all probability, the technique for analyzing the sample for
the components requested will require searching through several
possible sections of the handbook for an appropriate method. Perhaps
a second method will be selected to provide confirmation of the
analyte concentration, a method that might be longer or more costly
but one not to be used routinely. This collection of information in
one book instead of having to make many referrals will assist the
reader in selecting the best method(s) for a particular situation.
With quick and easy access to the myriad of analytical techniques
that the book provides, the reader can either choose the best one or
get specific information on the method selected. Only in exceptional
cases are procedures described in full. Enough information is
provided to enable the user to make a judicious and rational choice
from among the techniques and procedure available. Conditions and
details of the final measurement are included to serve as a
convenient ready reference. References given will direct the user to
additional information.
Finally, as results of analyses have been accumulated, some of
the statistical treatments outlined in Sec. 20 would be utilized;
certainly if a calibration curve is to be prepared, the least square
method for the best-fit line should be used and evaluated.
Theoretical discussions have been limited since several excellent
texts devoted to instrumental methods (including one coauthored by
this editor) are on the market. Likewise, the descriptions of
apparatus and methodology are restricted, yet sufficiently
comprehensive, to enable the user to judge intelligently between
available choices.
In this 2nd edition three new sections have been added: Analysis
of Pesticides and Herbicides; Air Analysis; and Analysis of Trace
Pollutants in the Environment. The latter replaces the section on
Water Analysis in the first edition, which has been deleted in this
edition. All other sections from the first edition are retained in
this edition. They have been reviewed, and some have been rearranged
and updated. The section on Statistics in Chemical Analysis has been
expanded to include a detailed discussion of the precision and
accuracy of measurements.
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation by Robert A. Meyers (John Wiley & Sons) Over the
last few decades, analytical chemistry has undergone a considerable
amount of change in the equipment and procedures used. Generally
analytical chemistry is concerned with the detection and
identification of atoms, ions or radicals that of which a substance
is composed, the compounds they form, and the proportions of these
compounds that are present in a given substance. The editors define
analytical chemistry as the measurement, characterization and
mapping of chemical species or systems varying from (1) the
components of life, such as proteins, carbohydrates, nucleic acids,
clinical samples, biomedical spectroscopy, forensics; (2) threats
and safeguards to life as in chemical weapons agents, pesticides,
environment, industrial hygiene and forensics; (3) life critical or
enhancing analyses, such as food and pharmaceuticals; and (4)
analyses required by industry, such as coatings, particle size,
polymers, rubbers, metals, pulp and paper, process, petroleum and
surfaces. The techniques utilized span the in-situ analysis of soil,
water, waste, air and the human body, to laboratory analyses, remote
sensing and stellar spectroscopy.
This major reference work, an epoch in a practical and summary
statement of basic methods and procedures in many material sciences,
will become a foremost location for baseline descriptions of chief
features of analytical chemistry. The contributors to
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation included over 800 authors, more than 600 peer
reviewers, 42 Section Editors and 13 distinguished Board Members and
Advisors worked on the production of the
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation for more than three years. Their objective was
to prepare the largest, most comprehensive compendium of analytical
chemistry ever. Indeed, this work has twice the bulk and breadth of
any other such compendium, such that a chemist (organic, polymer,
inorganic, biochemist, molecular biologist as well as, of course, an
analytical chemist), or a physicist or engineer (environmental,
industrial or materials) can find all the essential information
required to analyze any analyte in any matrix for any purpose or
application, interpret the results and also to gain a thorough
knowledge of the theory and instrumentation utilized.
The editors chose to organize the
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation mainly according to the recent-literature
summation sections comprising the annual Applications literature
review and Fundamentals review of the most cited journal of
chemical analysis, Analytical Chemistry. In fact, almost half of
our Section Editors have served as corresponding Editors for
Analytical Chemistry. The editors added some key sections not
covered in the review issues: these are Biomedical Spectroscopy,
Biomolecules Analysis, Chemical Warfare Chemicals Analysis, Nucleic
Acids Analysis and Remote Sensing. Thus, the articles comprising the
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation are organized into 24 Applications sections
presented in alphabetical order from Biomedical Spectroscopy
through to Surfaces -- these make up the first ten volumes. Then
there are 16 Theory and Instrumentation sections presented in the
next five volumes, beginning with Atomic Spectroscopy and concluding
with X-ray Spectrometry. The final section contains cross-cutting
articles (such as Analytical Problem Solving: Selection of
Analytical Methods, Quality Assurance in Analytical Chemistry,
Literature Searching Methodology) and this together with the
Appendices and Indexes completes the fifteenth volume.
The
Encyclopedia of Analytical Chemistry: Applications, Theory and
Instrumentation was designed to assist readers in finding the
appropriate information as simply as possible. For example, the user
knows whether the analyte in question is considered a protein or a
nucleic acid, or an environmental contaminant or food or petroleum
or a pharmaceutical etc., and goes directly to the alphabetized
section of that name in one of the clearly identified Applications
volumes. One or more, generally instrumental, methods are given in
sufficient detail to perform the needed analysis. If the reader
desires theory, design or operational information on a chosen
instrumental method (such as NMR, IR, MS, AA), the reader goes to
the appropriate alphabetized section in one of the five clearly
marked Theory and Instrumentation volumes to select the appropriate
articles. Optionally, the reader can rely on the detailed subject
index for the whole Encyclopedia. In addition, the Theory and
Instrumentation articles include key example spectra that are
cross-referenced within the Applications articles for easy access.
With exhaustive peer review the information was checked for
accuracy and detail. The articles are accessible to readers who have
a basic background in materials science especially analytical
chemistry. We append the full table of contents so the massive scope
of the work may be appreciated.
Contents
- Applications of Instrumental Methods
- Biomedical Spectroscopy
- Biomedical Spectroscopy - (Henry Mantsch)
- Medical Spectroscopy: Historical Perspective
-
Fluorescence
Imaging
-
Fluorescence
Spectroscopy
- In Vivo
-
Glucose,
In Vivo Assay of
Infrared
Spectroscopy in Clinical and Diagnostic Analysis
-
Infrared
Spectroscopy, Ex Vivo Tissue Analysis by
Magnetic Resonance Angiography
Magnetic
Resonance Imaging, Functional
- Multinuclear Magnetic Resonance Spectroscopic Imaging
- Magnetic Resonance in Medicine, High Resolution Ex Vivo
Near Infrared Spectroscopy, In Vivo Tissue Analysis by
Nuclear
Magnetic Resonance, General Medical
- Optical Coherence Tomography
- Photodynamic Therapy
Two-dimensional Vibrational Correlation Spectroscopy in
Biomedical Sciences
- Infrared Spectroscopy in Microbiology
- Biomolecules Analysis
- Biomolecules Analysis: Introduction
- Circular Dichroism in Analysis of Biomolecules
- Fluorescence-Based Biosensors
- High Performance Liquid Chromatography of Biological
Macromolecules
- Infrared Spectroscopy of Biological Applications
- Mass Spectrometry in Structural Biology
- Nuclear Magnetic Resonance of Biomolecules
- Raman Spectroscopy in Analysis of Biomolecules
- Single Biomolecule Detection and Characterization
- Vibrational Optical Activity of Pharmaceuticals and
Biomolecules
- Voltammetry In Vivo for Chemical Analysis of the Living
Brain
- Voltammetry, In Vivo for Chemical Analysis of the Nervous
System
- Carbohydrate Analysis - (Martin F. Chaplin)
- Carbohydrate Analysis: Introduction
- Disaccharide, Oligosaccharide and Polysaccharide Analysis
- Glycolipid Analysis
- Glycoprotein Analysis using Nuclear Magnetic Resonance
- Glycoprotein Analysis: General Methods
- Monosaccharides and Sugar Alcohol Analysis
- Proteoglycan and Acidic Polysaccharide Analysis
- Chemical Weapons Chemicals Analysis - (Markku
Mesilaakso)
- Verification of Chemicals Related to the Chemical Weapons
Convention: Introduction
- Capillary Electrophoresis in Detection of Chemicals Related
to the Chemical Weapons Convention
- Detection and Screening of Chemicals Related to the Chemical
Weapons Convention
- Fourier Transform Infrared in On-site and Off-site Analysis
of Chemicals Related to the Chemical Weapons Convention
- Gas Chromatography/Mass Spectrometry in Analysis of
Chemicals Related to the Chemical Weapons Convention
- Gas Chromatography/Mass Spectrometry in On-site Analysis of
Chemicals Related to the Chemical Weapons Convention
- Liquid Chromatography/Mass Spectrometry in Analysis of
Chemicals Related to the Chemical Weapons Convention
- Nuclear Magnetic Resonance Spectroscopy in Analysis of
Chemicals Related to the Chemical Weapons Convention
- Sample Preparation for Analysis of Chemicals Related to the
Chemical Weapons Convention
- Sampling, Detection and Screening of Chemicals Related to
the Chemical Weapons Convention
- Screening by Gas Chromatography for Chemicals Related to the
Chemical Weapons Convention
- Clinical Chemistry - (Merle A. Evenson)
- (a) Clinical Chemistry: Introduction
- Automation in the Clinical Laboratory
- Biosensor Design and Fabrication
- Capillary Electrophoresis in Clinical Chemistry
- Biochemical Markers of Acute Coronary Syndromes
- Hematology, Diagnostic
- DNA Arrays, Preparation and Application
- Lipid Analysis for Important Clinical Conditions
- Drugs of Abuse Analysis
- Electroanalysis and Biosensors in Clinical Chemistry
- Electroanalytical Chemistry in Clinical Analysis
- Electrolytes, Blood Gases and Blood pH
- Glucose Measurement
- Immunochemistry
- Infrared Spectroscopy in Clinical Chemistry
- Laboratory Instruments in Clinical Chemistry, Principles of
- Phospholipids of Plasma Lipoproteins, Red Blood Cells and
Atheroma, Analysis of
- Gas Chromatography and Mass Spectrometry in Clinical
Chemistry
- Micro Total Analytical Systems in Clinical Chemistry
- Molecular Biological Analyses & Molecular Pathology in
Clinical Chemistry
- Nucleic Acid Analysis in Clinical Chemistry
- Pharmacogenetic Testing
- Phosphorescence, Fluorescence and Chemiluminescence in
Clinical Chemistry
- Planar Chromatography in Clinical Chemistry
- Point-of-Care Testing
- Product Development for the Clinical Laboratory
- Serum Proteins
- Statistical Quality Control in Clinical Laboratories
- Supercritical Fluid Chromatography in Clinical Chemistry
- Atomic Spectrometry in Clinical Chemistry
- Ultraviolet/Visible Light Absorption Spectrophotometry in
Clinical Chemistry
- Urinalysis and Other Bodily Fluids
- Coatings - (Dennis G. Anderson)
- Coatings Analysis: Introduction
- Atomic Spectroscopy in Coatings Analysis
- Gas Chromatography in Coatings Analysis
- Infrared and Raman Spectroscopy and Imaging in Coatings
Analysis
- Mechanical Properties of Solid Coatings
- Microscopy of Coatings
- Nuclear Magnetic Resonance of Coating and Adhesive Systems
- Rheology in Coatings, Principles and Methods
- Thermal Analysis of Coatings
- Environment: Trace Gas Monitoring - (Markus W. Sigrist)
- Environmental Trace Species Monitoring: Introduction
- Airborne Instrumentation for Aerosol Measurements
- Automotive Emissions Analysis with Spectroscopic Techniques
- Differential Optical Absorption Spectroscopy, Air Monitoring
by
- Diode Laser Spectroscopic Monitoring of Trace Gases
- Elemental Analysis with Laser Induced Breakdown Spectroscopy
- Optical Gas Sensors in Analytical Chemistry
- Fourier Transform Infrared Spectrometery in Atmospheric and
Trace Gas Analysis
- Infrared Lidar Applications in Atmospheric Monitoring
- Laser Absorption Spectroscopy, Air Monitoring by Tunable
Mid-infrared Diode
- Laser Mass Spectrometry in Trace Analysis
- Laser-based Combustion Diagnostics
- Laser- and Optical-based Techniques for the Detection of
Explosives
- Matrix Isolation Spectroscopy in Atmospheric Chemistry
- Photoacoustic Spectroscopy in Trace Gas Monitoring
- Ultraviolet/Visible Lidar Applications in Air Monitoring
- Environment: Water and Waste - (Marvin Miller)
- Environmental Water and Waste Monitoring: Introduction
- Luminescence in Environmental Analysis
- Asbestos Analysis
- Atomic Absorption by Flame and Graphite Furnace in
Environmental Analysis
- Atomic Fluorescence in Environmental Analysis
- Biological Samples in Environmental Analysis, Preparation
and Clean-up
- Capillary Electrophoresis coupled to Inductively Coupled
Plasma-Mass Spectrometry for Elemental Sepciation Analysis
- Cyanogen Chloride and Cyanogen Bromide Analysis in Drinking
Water
- Detection and Quantification of Environmental Pollutants
- Dioxin-like Compounds, Screening Assays
- Dyes: Environmental Analysis of
- Explosives Analysis in the Environment
- Flow Injection Techniques in Environmental Analysis
- Formaldehyde, Analysis of
- Gas Chromatography by Direct Aqueous Injection in
Environmental Analysis
- Gas Chromatography with Atomic Emission Detection in
Environmental Analysis
- Gas Chromatography with Selective Detectors in Environmental
Analysis
- Heavy Metals Analysis in Sea Water and Brines
- Hydride Generation Sample Introduction for Spectroscopic
Analysis in Environmental Samples
- Immunoassay Techniques in Environmental Analysis
- Inductively Coupled Plasma Mass Spectrometry in
Environmental Analysis
- Industrial Waste Dumps, Sampling and Analysis
- Infrared Spectroscopy in Environmental Analysis
- Inorganic Analysis in Environmental Samples by Capillary
Electrophoresis
- Inorganic Environmental Analysis by Electrochemical Methods
- Ion Chromatography in Environmental Analysis
- Ion Selective Electrodes in Environmental Analysis
- Laser Ablation Inductively Coupled Plasma Spectroscopy in
Environmental Analysis
- Liquid Chromatography/Mass Spectrometry in Environmental
Analysis
- Mercury Analysis in Environmental Samples by Cold Vapor
Techniques
- Microwave-assisted Techniques for Sample Preparation in
Organic Environmental Analysis
- Microwave-enhanced Solvent Extraction of Organics in
Environmental Analysis
- Neutron Activation in Environmental Analysis
- Nitroaromatics, Environmental Analysis of
- Nuclear Magnetic Resonance for Environmental Monitoring
- Optical Emission Inductively Coupled Plasma in Environmental
Analysis
- Organic Acids Analysis in Environmental Samples, Ion
Chromatography for Determination of
- Organic Analysis in Environmental Samples by Capillary
Electrophoresis
- Organic Analysis in Environmental Samples by Electrochemical
Methods
- Organometallic Compound Analysis in Environmental Samples
- Pervaporation, Analytical
- Phenols Analysis in Environmental Samples
- Polychlorinated Biphenyls Analysis in Environmental Samples
- Polynuclear Aromatic Hydrocarbons Analysis in Environmental
Samples
- Proton Induced X-ray Emission in Environmental Analysis
- Quality Assurance in Environmental Analysis
- Sample Preparation for Elemental Analysis in Aqueous
Matrices.
- Sample Preparation for Elemental Analysis in Biological
Samples in the Environment
- Sample Preparation for Environmental Analysis in Solids
(soils, sediments and sludges)
- Soxhlet and Ultrasonic Extraction of Organics in Solids
- Sampling Considerations for Biomonitoring
- Slurry Sampling Graphite Furnace Atomic Absorption
Spectroscopy in Environmental Analysis
- Soil Instrumental Methods
- Soil Sampling for the Characterization of Hazardous Waste
Sites
- Solid Phase Microextraction in Environmental Analysis
- Supercritical Fluid Extraction of Inorganics in
Environmental Analysis
- Supercritical Fluid Extraction of Organics in Environmental
Analysis
- Trace Organic Analysis by Gas Chromatography with Selective
Detectors
- Trace Ogranic Analysis by Gas Chromatography with Quadrupole
Mass Spectrometry
- Trihalomethanes in Water, Analysis of
- Underground Fuel Spills, Source Identification
- Volatile Organic Compounds in Groundwater, Probes for the
Analysis of
- Waste Extraction Procedures
- Water Analysis, Organic Carbon Determinations
- X-ray Fluorescence Spectrometric Analysis of Liquid
Environmental Samples
- Field Portable and Transportable Air and Vapor Measurement -
(Michel Goedert)
- Air and Vapor Measurements in the Field: Introduction
- Aircraft-based Flux Sampling Strategies
- Chemical-sensing Networks that are Satellite-based
- Cone-Penetrometer-Deployed Samplers and Chemical Sensors
- Electrochemical Sensors, for Field Measurement of Gases and
Vapors
- Field-Based Analysis of Organic Vapors in Air
- Field-Portable Instrumentation
- Micro-Electromechanical Systems Technology applied to the
Miniaturisation of Field Instrumentation
- Mobile Mass Spectrometry used for On-site/In-situ
Environmental Measurements
- Radon, Indoor and Remote Measurement of
- Solid State Sensors for Field Measurements of Gases and
Vapors
- Solid Phase Microextraction in Analysis of Pollutants in the
Field
- Food - (Robert J. McGorrin)
- Food Analysis: Introduction
- Adulteration Determination
- Atomic Spectroscopy in Food Analysis
- Dietary Fiber Analysis as Non-Starch Polysaccharides
- Electrophoresis and Isoelectric Focusing in Food Analysis
- Enzyme Analysis and Bioassays in Food Analysis
- Flavor Analysis
- Fluorescence Spectroscopy in Food Analysis
- Infrared Spectroscopy, Gas Chromatography/Infrared in Food
Analysis
- Lipid Analysis in Food
- Liquid Chromatography in Food Analysis
- Near Infrared Spectroscopy in Food Analysis
- Nuclear Magnetic Resonance in Analysis of Foodstuffs and
Plant Materials
- Nuclear Magnetic Resonance in Analysis of Plant Soil
Environments
- Particle Size Analysis in Food
- Pesticides, Mycotoxins and Residues Analysis in Food
- Proteins, Peptides and Amino Acids Analysis in Food
- Proximate Assays in Food Analysis
- Sample Preparation, Analytical Techniques
- Sample Preparation, General
- Sample Preparation, Headspace Techniques
- Starch Analysis
- Viscosity of Food
- Vitamins Analysis in Food
- Water Determination in Food
- Forensic Science - (Thomas A. Brettell)
- Forensic Science: Introduction
- Chiroptical Spectroscopy in Drug Analysis
- DNA Extraction Methods in Forensic Analysis
- Fluorescence in Forensic Science
- Immunoassays in Forensic Toxicology
- Atomic Spectroscopy in Forensic Science
- Capillary Ion Electrophoresis in Forensic Science
- Ion Mobility Spectrometry in Forensic Science
- Mass Spectrometry for Forensic Applications
- Microspectrophotometry in Forensic Science
- Nuclear Magnetic Resonance Spectroscopy for the Detection
and Quantification of Abused Drugs
- Polymerase Chain Reaction in the Forensic Analysis of DNA
- Pyrolysis Gas Chromatography in Forensic Science
- Scanning Electron Microscopy in Forensic Science
- X-ray Fluorescence in Forensic Science
- Industrial Hygiene - (Clifford R. Glowacki)
- Industrial Hygiene: Introduction
- Aerosols and Particulates Analysis: In Indoor Air
- Carcinogens, Monitoring of Indoor Air
- Chromatographic Techniques in Industrial Hygiene
- Direct Reading Instruments for the Determination of Aerosols
and Particulates
- Dust, Measurement of Trace Elements in
- Metals in Blood and Urine, Biological Monitoring for Worker
Exposure
- Parent and Progeny Compounds in Exhaled Breath,
Determination of
- Sampling and Recovery Techniques for the Determination of
Gases and Vapours in Air
- Sensors in the Measurement of Toxic Gases in the Air
- Spectroscopic Techniques in Industrial Hygiene
- Surface and Dermal Monitoring
- Nucleic Acids: Structure and Mapping - (Cassandra L.
Smith)
- Nucleic Acids Structure and Mapping: Introduction
- Aptamers
- Genome Physical Mapping using Bacterial Artificial
Chromosomes
- Capillary Electrophoresis of Nucleic Acids
- Electron Tomography of Chromosome Structure
- Comparative Genomics: Differential Display and Subtractive
Hybridization
- DNA Molecules, Properties and Detection of Single
- DNA Probes
- DNA Structures of Biological Relevance, Studies of Unusual
Sequences
- Fluorescence In-situ Hybridization
- Mass Spectrometry of Nucleic Acids
- Nuclear Magnetic Resonance and Nucleic Acid Structures
- Nucleic Acid Structural Energetics
- Nucleic Acid X-ray Structures
- Sequencing and Fingerprinting DNA by Hybridization with
Oligonucleotide Probes
- Optical Mapping in Genomic Analysis
- PNA and its Applications
- Polycyclic Aromatic Compounds Mapping
- Polymerase Chain Reaction and other Amplification Systems
- Radiation Hybrid Mapping
- Restriction Landmark Genomic and cDNA Scanning (RLGS/RLCS)
- Ribozymes, Structural Analysis
- RNA Tertiary Structure
- Sequencing Strategies and Tactics in DNA and RNA Analysis
- Particle Size Analysis - (Richard B. Flippen)
- Particle Size Analysis: Introduction
- Centrifugation in Particle Size Analysis
- Diffraction in Particle Size Analysis
- Electrozone Sensing in Particle Size Analysis
- Field-Flow Fractionation in Particle Size Analysis
- Filtration in Particle Size Analysis
- Light Scattering, Classical: Size and Size Distribution
Characterization
- Optical Particle Counting
- Photon Correlation Spectroscopy in Particle Size Analysis
- Sedimentation in Particle Size Analysis
- Sieving in Particle Size Analysis
- Surface Area and Pore Size Distributions
- Turbidimetry in Particle Size Analysis
- Ultrasonic Measurements in Particle Size Analysis
- Velocimetry in Particle Size Analysis
- Peptides and Proteins - (Christian Schoneich)
- Peptides and Proteins: Introduction
- Capillary Electrophoresis in Peptide and Protein Analysis,
Detection Modes for
- Capillary Electrophoresis of Peptides
- Capillary Electrophoretic Analysis of Proteins and
Gylcoproteins
- Capillary Electrophoresis/Mass Spectrometry in Peptide and
Protein Analysis
- Chromatography of Membrane Proteins and Lipoproteins
- Electron Spin Resonance Spectroscopy Labeling in Peptide and
Protein Analysis
- Fluorescence Spectroscopy in Peptide and Protein Analysis
- Fourier Transform Infrared Spectroscopy in Peptide and
Protein Analysis
- Gel Electrophoresis in Protein and Peptide Analysis
- High Performance Liquid Chromatography Separations and
Equipment in Peptide and Protein Analysis, Miniaturization of
- High Performance Liquid Chromatography/Mass Spectrometry in
Peptide and Protein Analysis
- Hydrophobic and Hydrophilic Interaction Chromatography in
Peptide and Protein Analysis
- Matrix Assisted Laser Desorption Ionization Mass
Spectrometry in Peptide and Protein Analysis
- Molecular Modeling in Peptide and Protein Analysis
- Peptide Diastereomers, Separation of
- Post-translational Oxidative Modifications of Proteins
- Protein Purification: Theoretical and Methodological
Considerations
- Protein–Drug Interactions
- Protein–Oligonucleotide Interactions
- Proteolytic Mapping
- Reversed Phase High Performance Liquid Chromatography in
Peptide and Protein Analysis
- Surface Plasmon Resonance Spectroscopy in Peptide and
Protein Analysis
- X-ray Crystallography of Biological Macromolecules
- Peptides and Proteins: Introduction
- Capillary Electrophoresis in Peptide and Protein Analysis,
Detection Modes for
- Capillary Electrophoresis of Peptides
- Capillary Electrophoretic Analysis of Proteins and
Gylcoproteins
- Capillary Electrophoresis/Mass Spectrometry in Peptide and
Protein Analysis
- Chromatography of Membrane Proteins and Lipoproteins
- Electron Spin Resonance Spectroscopy Labeling in Peptide and
Protein Analysis
- Fluorescence Spectroscopy in Peptide and Protein Analysis
- Fourier Transform Infrared Spectroscopy in Peptide and
Protein Analysis
- Gel Electrophoresis in Protein and Peptide Analysis
- High Performance Liquid Chromatography Separations and
Equipment in Peptide and Protein Analysis, Miniaturization of
- High Performance Liquid Chromatography/Mass Spectrometry in
Peptide and Protein Analysis
- Hydrophobic and Hydrophilic Interaction Chromatography in
Peptide and Protein Analysis
- Matrix Assisted Laser Desorption Ionization Mass
Spectrometry in Peptide and Protein Analysis
- Molecular Modeling in Peptide and Protein Analysis
- Peptide Diastereomers, Separation of
- Post-translational Oxidative Modifications of Proteins
- Protein Purification: Theoretical and Methodological
Considerations
- Protein–Drug Interactions
- Protein–Oligonucleotide Interactions
- Proteolytic Mapping
- Reversed Phase High Performance Liquid Chromatography in
Peptide and Protein Analysis
- Surface Plasmon Resonance Spectroscopy in Peptide and
Protein Analysis
- X-ray Crystallography of Biological Macromolecules
- Pesticides - (Antonio Di-Corcia)
- Pesticide Analysis: Introduction
- Biological Matrices, Pesticides Content Sampling, Sample
Preparation, Preservation
- Carbamate and Carbamoyloxime Insecticides; Single-class,
Multi-residue Analysis of
- Chiral Pesticides and Polychlorinated biphenyl Congeners in
Environmental Samples, Analysis of
- Gas Chromatography and Supercritical Fluid Chromatography
with Selective Detection in Pesticide Analysis
- Gas Chromatography/Mass Spectrometry Methods in Pesticide
Analysis
- Herbicide Residues in Biota, Analysis of
- Herbicides (New Generation): Imidazolinones,
Arylphenoxypropionic Acids/Esters and Diphenylethers, Analysis
of
- High Performance Liquid Chromatography Methods in Pesticide
Residue Analysis
- High Performance Liquid Chromatography/Mass Spectrometry
Methods in Pesticide Analysis
- Immunochemical Assays in Pesticide Analysis
- Multi-class, Multi-residue Analysis of Pesticides,
Strategies for
- Organochlorine, Pyrethrin and Pyrethroid Insecticides;
Single Class, Multi-residue Analysis of
- Organophosphorus Pesticides in Water and Food, Analysis of
- Phenoxy Acid and other Acidic Pesticides; Single Class,
Multi-residue Analysis of
- Phenyl and Sulfonylurea Herbicides; Single Class,
Multi-residue Analysis of
- Miscellaneous Pesticides and Related Compounds, Analysis of
- Soil and Sediments: Pesticides Content Sampling, Sample
Preparation, and Preservation
- s-Triazine Herbicides and their Transformation Products,
Multi-residue Analysis of
- Pesticides in Water: Sampling, Sample Preparation,
Preservation
- Petroleum and Liquid Fossil Fuels Analysis - (Peter A.
Nick)
- Petroleum Analysis: Introduction
- Diesel Fuels Analysis
- High Resolution Mass Spectrometric (Homolog) Type Analysis
of Petroleum and Synfuel Distillates and Refinery Streams
- Fuel Performance Specifications, Mid-infrared Analysis of
- Fuels Analysis, Regulatory Specifications for
- Full Range Crudes, Analytical Methodology of
- Near Infrared Spectroscopy in Analysis of Crudes and
Transportation Fuels
- High Temperature SimDist Applications in Petroleum
Characterization
- Use of Inspection Properties to Predict Hydrocarbon Fraction
Physical Properties
- Hydrocarbons, Gas Chromatography Procedures for On-line and
Off-line Analysis
- Lube Products. Molecular Characterization of Base Oils
- Lubricant Base Oils, Analysis and Characterization of
- Metals, Nitrogen and Sulfur in Petroleum Residue, Analysis
of
- Nuclear Magnetic Resonance Characterization of Petroleum
- Oxygenate Vapor–Liquid Equilibriums in Gasolines
- Oil Shale and Shale Oil Analysis
- Mass Spectrometry, Low Resolution Electron Impact
- Petroleum Residues, Characterization of
- Refractive Index Technology as a Real Time Viscosity
Technique
- Pharmaceuticals and Drugs - (R.K. Gilpin)
- Pharmaceuticals and Drugs: Introduction
- Alkaloids, Pharmaceutical Analysis of
- Antibiotics, Pharmaceutical Analysis of
- Chemical Reagents and Derivatization Procedures in Drug
Analysis
- Chiral Purity in Drug Analysis
- Combinatorial Chemistry Libraries, Analysis of
- Gas Chromatography and Liquid Chromatography Analysis,
Column Selection in Drug Analysis
- Eluent Additives and the Optimization of High Performance
Liquid Chromatography Procedures
- Mass Spectrometry to Pharmaceutical Analysis
- Nuclear Magnetic Resonance Spectroscopy in Pharmaceutical
Analysis
- Planar Chromatography in Pharmaceutical Analysis
- Proteins and Peptides Purification in Pharmaceuticals
Analysis
- Quantitative Structure Activity Relationships and
Computational Methods in Drug Discovery
- Robotics and Laboratory Automation in Pharmaceuticals
Analysis
- Solid-Phase Extraction and Clean-up Procedures in
Pharmaceutical Analysis
- Steroid Analysis
- Vibrational Spectroscopy in Drug Discovery, Development and
Production
- Vitamins, Fat and Water Soluble, Analysis of
- Polymers and Rubbers - (Theodore Provder)
- Polymers and Rubbers: Introduction
- Atomic Force Microscopy in Analysis of Polymers
- Dielectric Spectroscopy in Analysis of Polymers
- Dynamic Mechanical Analysis in the Analysis of Polymers and
Rubbers
- Field Flow Fractionation in Analysis of Polymers and Rubbers
- Gas Chromatography in the Analysis of Polymers and Rubbers
- Infrared Spectroscopy in Analysis of Plastics Recycling
- Infrared Spectroscopy in Analysis of Polymer Crystallinity
- Infrared Spectroscopy in Analysis of Polymer Degradation
- Infrared Spectroscopy in Analysis of Polymer
Structure–Property Relationships
- Infrared Spectroscopy in Analysis of Polymers and Rubbers
- Inverse Gas Chromatography in Analysis of Polymers and
Rubbers
- Coupled Liquid Chromatographic Techniques in Molecular
Characterization
- Mechanical Properties of Polymers and Rubbers
- Near Infrared Spectroscopy of Polymers and Rubbers
- Neutron Scattering in Analysis of Polymers and Rubbers
- Nuclear Magnetic Resonance, Imaging of Polymers
- Nuclear Magnetic Resonance, Solid State in the Analysis of
Polymers and Rubbers
- Positron Annihilation Spectroscopy of Polymers and Rubbers
- Pyrolysis Techniques in the Analysis of Polymers and Rubbers
- Size Exclusion Chromatography of Polymers
- Supercritical Fluid Chromatography of Polymers
- Surface Energetics of Polymers and Rubbers, Characterization
of
- Temperature Rising Elution Fractionation and Crystallization
Analysis Fractionation
- Thermogravimetry of Polymers
- X-ray Scattering in Analysis of Polymers
- Process Instrumental Methods - (James W. Peterson)
- (a) Process Analysis: Introduction
- Chemometric Methods in Process Analysis
- Flow and Sequential Injection Analysis Techniques in Process
Analysis
- Process Chromatography
- Infrared Spectroscopy in Process Analysis
- Mass Spectrometry in Process Analysis
- Near Infrared Spectroscopy in Process Analysis
- Nuclear Magnetic Resonance and Magnetic Resonance Imaging
for Process Analysis
- Raman Spectroscopy for Process Analysis
- Sampling and Sample Preparation
- Titration Techniques for Process Analysis
- Ultraviolet/Visible Spectroscopy in Process Analysis
- Pulp and Paper - (Bruce B. Sithole)
- Pulp and Paper Matrices Analysis: Introduction
- Carbohydrates from Chemical Pulps: Characterization by
Capillary Zone Electrophoresis
- Fourier Transform Infrared Spectroscopy in the Pulp and
Paper Industry
- Mechanical Pulps, Ultraviolet/Visible Spectroscopy of
Chromophores in
- Paper Surfaces Analysis by X-ray Photoelectron Spectroscopy
- Pulp and Paper Matrices
- Pyrolysis in the Pulp and Paper Industry
- Remote Sensing - (Paul M. Mather)
- Remote Sensing: Introduction
- Assessment of Semiarid Lands: Monitoring Dry Ecosystems with
Remote Sensing
- Biological Oceanography by Remote Sensing
- Elevation Modeling and Displacement Mapping using Radar
Interferometry
- Elevation Modeling from Satellite Data
- Global Land Databases for Environmental Analyses
- Hyperspectral Remote Sensing: Data Collection and
Exploitation
- Imaging Spectrometry for Geological Applications
- Land Cover Assessment and Monitoring
- Polar Environments Assessment by Remote Sensing
- Processing and Classification of Satellite Images
- Satellite and Sensor Systems for Environmental Monitoring
- Sea Ice Monitoring by Remote Sensing
- Stellar Spectroscopy
- Temperate Forest Resource Assessment by Remote Sensing
- Tropical Forest Resources Assessment by Remote Sensing
- Steel and Related Materials - (Thomas R. Dulski)
- Steel and Related Materials: Introduction
- Automation of Analytical Control in the Steel and Metals
Industry
- Iron and Steel Analysis, Solution-based Atomic Absorption
and Emission Spectrometry
- Iron Ore, Sample Preparation and Analysis of
- Metals Analysis, Sampling and Sample Preparation in
- Nickel Ore and Metals Analysis
- Noble Metals, Analytical Chemistry of
- Nuclear Magnetic Resonance in Metals Analysis
- Thermal Evolution Methods for Carbon, Sulfur, Oxygen,
Nitrogen and Hydrogen in Iron and Steel Analysis
- X-ray Fluorescence Spectroscopy in the Iron and Steel
Industry
- Surfaces - (Gary E. McGuire)
- Surfaces: Introduction
- Auger Electron Spectroscopy in Analysis of Surfaces
- Proximal Probe Techniques
- Differential Reflectance Spectroscopy in Analysis of
Surfaces
- Electron Energy Loss Spectroscopy in Analysis of Surfaces
- Electron Microscopy and Scanning Microanalysis
- Ellipsometry in the Analysis of Surfaces and Thin Films
- Scanning Probe Microscopy, Industrial Applications of
- Ion Scattering Spectroscopy in Analysis of Surfaces
- Photoluminescence in Analysis of Surfaces and Interfaces
- Scanning Electron Microscopy in Analysis of Surfaces
- Scanning Tunneling Microscopy/Spectroscopy in Analysis of
Surfaces
- Soft X-ray Photoemission Spectroscopy in Analysis of
Surfaces
- Infrared and Raman Spectroscopy in Analysis of Surfaces
- X-ray Photoelectron Spectroscopy in Analysis of Surfaces
- Theory and Instrumentation
- Atomic Spectroscopy - (Gary M. Hieftje)
- Atomic Spectroscopy: Introduction
- Background Correction Methods in Atomic Absorption
Spectroscopy
- Flame and Vapor Generation Atomic Absorption Spectrometry
- Flow Injection Analysis Techniques in Atomic Spectroscopy
- Glow Discharge Optical Spectroscopy and Mass Spectrometry
- Graphite Furnace Atomic Absorption Spectrometry
- Inductively Coupled Plasma Optical Emission Spectroscopy
- Laser Ablation in Atomic Spectroscopy
- Laser-Induced Breakdown Spectroscopy
- Laser Spectrometric Techniques in Analytical Atomic
Spectroscopy
- Microwave Induced Plasma Systems in Atomic Spectroscopy
- Chemometrics - (Steven Brown)
- Chemometrics: Introduction
- Classical and Non-classical Optimization Methods
- Clustering and Classification of Analytical Data
- Multivariate Calibration of Analytical Data
- Second-order Calibration and Higher
- Signal Processing in Analytical Chemistry
- Soft Modeling of Analytical Data
- Electroanalytical Methods - (Henry S. White,
Richard M. Crooks)
- Electroanalytical Methods: Introduction
- Chemiluminesence, Electrogenerated
- Infrared Spectroelectrochemistry
- Ion Selective Electrodes: Fundamentals
- Liquid/Liquid Interfaces, Electrochemistry at
- Microbalance, Electrochemical Quartz Crystal
- Neurotransmitters, Electrochemical Detection of
- Organic Electrochemical Mechanisms
- Pulse Voltammetry
- Scanning Tunneling Microscopy, In-situ, Electrochemical
- Selective Electrode Coatings for Electroanalysis
- Self-assembled Monolayers on Electrodes
- Spectroelectrochemistry, Ultraviolet/Visible
- Surface Analysis for Electrochemistry: Ultrahigh Vacuum
Techniques
- Ultrafast Electrochemical Techniques
- X-ray Methods for the Study of Electrode Interactions
- Electronic Absorption and Luminescence Spectroscopy - (Isiah
M. Warner)
- Electronic Absorption and Luminescence: Introduction
- Circular Dichroism and Linear Dichroism
- Ultraviolet and Visible Molecular Absorption and
Fluorescence Data, Analysis of
- Indirect Detection Methods in Capillary Electrophoresis
- Detectors, Absorption and Luminescence
- Fluorescence Imaging Microscopy
- Fluorescence Lifetime Measurements, Applications of
- Fluorescence in Organized Assemblies
- Near Infrared Absorption/Luminescence Measurements
- Phosphorescence Measurements, Applications of
- Probes, Absorption and Luminescence
- Surface Measurements using Absorption/Luminescence
- Gas Chromatography - (Gary A. Eiceman)
- Gas Chromatography: Introduction
- Column Technology in Gas Chromatography
- Data Reduction in Gas Chromatography
- Hyphenated Gas Chromatography
- Instrumentation of Gas Chromatography
- Liquid Phases for Gas Chromatography
- Multidimensional Gas Chromatography
- Sample Preparation for Gas Chromatography
- Infrared Spectroscopy - (Marianne L. McKelvy)
- Infrared Spectroscopy: Introduction
- Spectral Data, Modern Classification Methods for
- Cavity Ringdown Laser Absorption Spectroscopy
- Emission Spectroscopy, Infrared
- Gas Chromatography-Infrared Spectroscopy
- Infrared Reflection–Absorption Spectroscopy
- Infrared Spectra, A Practical Approach to the Interpretation
of
- Infrared Spectroscopy, Theory of
- Liquid Chromatography–Infrared Spectroscopy
- Microspectroscopy, Infrared
- Quantitative Analysis, Infrared
- Spectral Databases, Infrared
- Vibrational Spectroscopy for the Analysis of Geological and
Inorganic Materials
- Kinetic Determinations - (Horacio A. Mottola)
- (a) Kinetic Determinations: Introduction
- Catalytic Kinetic Determinations: Non-Enzymatic
- Data Treatment and Error Analysis in Kinetics
- Differential Rate Determinations
- Electrocatalysis-based Kinetics Determinations
- Enzymatic Kinetic Determinations
- Instrumentation for Kinetics
- Luminescence-based Kinetic Determinations
- Uncatalyzed Kinetic Determinations
- Liquid Chromatography - (John G. Dorsey)
- Liquid Chromatography: Introduction
- Affinity Chromatography
- Biopolymer Chromatography
- Capillary Electrophoresis
- Chiral Separations by High Performance Liquid Chromatography
- Column Theory and Resolution in Liquid Chromatography
- Gradient Elution Chromatography
- Ion Chromatography
- Micellar Electrokinetic Chromatography
- Microscale High Performance Liquid Chromatography and the
Evolution of Capillary Electrochromatography
- Normal-Phase Liquid Chromatography
- Reversed Phase Liquid Chromatography
- Silica Gel and its Derivatization for Liquid Chromatography
- Supercritical Fluid Chromatography
- Thin Layer Chromatography
- Mass Spectrometry - (O. David Sparkman)
- Mass Spectrometry: Overview and History
- Artificial Intelligence and Expert Systems in Mass
Spectrometry
- Atmospheric Pressure Ionization Mass Spectrometry
- Chemical Ionization Mass Spectrometry: Theory and
Applications
- Discrete Energy Electron Capture Negative Ion Mass
Spectrometry
- Electron Ionization Mass Spectrometry
- Fourier Transform Ion Cyclotron Resonance Mass Spectrometry:
A Primer
- Gas Chromatography/Mass Spectrometry
- High Resolution Mass Spectrometry and its Applications
- Inorganic Substances, Mass Spectrometry in the Analysis of
- Isotope Ratio Mass Spectrometry
- Liquid Chromatography/Mass Spectrometry
- Literature of Mass Spectrometry
- Quadrupole Ion Trap Mass Spectrometer
- Secondary Ion Mass Spectrometry as Related to Surface
Analysis
- Tandem Mass Spectrometry: Fundamentals and Instrumentation
- Time-of-Flight Mass Spectrometry
- Nuclear Magnetic Resonance and Electron Spin Resonance
Spectroscopy - (Cecil Dybowski)
- Nuclear Magnetic Resonance and Electron Spin Resonance
Spectroscopy: Introduction
- Carbon-13 Nuclear Magnetic Resonance Spectroscopy
- Chemical Shifts in Nuclear Magnetic Resonance, General
- Electron Spin Resonance Spectroscopy
- High Performance Liquid Chromatography-Nuclear Magnetic
Resonance
- Nuclear Magnetic Resonance Instrumentation
- Nuclear Magnetic Resonance of Geological Materials and
Glasses
- Parameters, Calculation of Nuclear Magnetic Resonance
- Quadrupolar Couplings in Nuclear Magnetic Resonance, General
- Quadrupolar Nuclei in Solid State Nuclear Magnetic Resonance
- Relaxation in Nuclear Magnetic Resonance, General
- Scalar Couplings in Nuclear Magnetic Resonance, General
- Solid-State Nuclear Magnetic Resonance
- Solid-State Nuclear Magnetic Resonance: Spin-1/2 Nuclei
other than Carbon and Proton
- Solution Nuclear Magnetic Resonance: Spin-1/2 Nuclei other
than Carbon and Proton
- Two, Three, Four-dimensional Nuclear Magnetic Resonance of
Biomolecules
- Two-dimensional Nuclear Magnetic Resonance of Small
Molecules
- Zeeman Interaction in Nuclear Magnetic Resonance
- Nuclear Methods - (Zeev B. Alfassi)
- Chemical Analysis by Nuclear Methods: An Introduction
- Charged Particle Activation Analysis
- Cyclic Activation Analysis
- Elastic Recoil Detection Analysis
- Elemental Analysis by Isotope Dilution
- Instrumental Neutron Activation Analysis
- Instrumental Neutron Activation Analysis Gamma Lines Tables
- Nuclear Reaction Analysis
- Particle Induced Gamma-ray Emission
- Particle Induced X-ray Emission
- Photon Activation Analysis
- Prompt Gamma Neutron Activation Analysis
- Radiochemical Neutron Activation Analysis
- Radiotracer Methods
- Rutherford Backscattering Spectroscopy
- Scattering and Absorption of Gamma Rays and Thermalization
and Disappearance of Neutrons
- Radiochemical Separation Schemes for Multi-element
Determination
- Radiochemical Methods - (Rolf J. Rosenberg)
- Radiochemical Methods: Introduction
- Actinides and other Alpha Emitters, Determination of
- Beta Particle Emitters, Determination of
- High Resolution Gamma Spectrometry for Radionuclide
Determination
- Mass Spectrometry of Long-Lived Radionuclides
- Neutron Activation Analysis in the Determination of very
Long-Lived Radionuclides
- Nuclear Detectors in Analytical Chemistry
- Speciation of Radionuclides in the Environment
- Raman Spectroscopy - (Javier J. Laserna)
- Raman Spectroscopy: Introduction
- Dispersive Raman Spectroscopy, Current Instrumental Designs
- Fourier Transform Raman Instrumentation
- Raman Microscopy and Imaging
- Raman Scattering, Fundamentals of
- Thermal Analysis - (David Dollimore)
- Thermal Analysis: Introduction
- Differential Scanning Calorimetry and Differential Thermal
Analysis
- Inorganic Systems, Thermal Analysis Applications to
- Simultaneous Techniques in Thermal Analysis
- Thermogravimetry
- X-ray Photoelectron Spectroscopy and Auger Electron
Spectroscopy - (Kai Siegban)
- X-ray Photoelectron Spectroscopy and Auger Electron
Spectroscopy: Introduction
- X-ray Photoelectron and Auger Electron Spectroscopy
- X-ray Spectrometry - (Rene E. Van Grieken)
- X-ray Techniques, Overview
- Absorption Techniques in X-ray Spectrometry
- Ultrafast Diffraction Techniques
- Portable Systems for Energy-dispersive X-ray Fluorescence
- Structure Determination, X-ray Diffraction for
- Total Reflection X-ray Fluorescence
- X-ray Fluorescence Analysis, Energy-dispersive
- X-ray Fluorescence Analysis, Sample Preparation for
- X-ray Fluorescence Analysis, Wavelength-dispersive
- General Articles
- Analytical Problem Solving - Selection of Analytical Methods
- Archaeological Chemical Analysis
- Multivariate Image Analysis
- Literature Searching Methodology
- Gravimetry
- Karl Fischer Moisture Determination
- Microwave Techniques
- Quality Assurance in Analytical Chemistry
- Quantitative Spectroscopic Calibration
- Spot Test Analysis
- Titrimetry
- Traceability in Analytical Chemistry
- Ultrafast Laser Technology and Spectroscopy
- Appendices
- Acid Dissociation Constants at 25 °C
- Complex Formation Constants
- Concentrations of Commercial Reagent-grade Acids and Bases
- Formula Weights
- Grades of Chemicals
- pH Indicators
- SI Units
- Solubility Products at 25 °C
- Standard Electrode Potentials at 25 °C
- The Twenty Amino Acids that Combine to Form
- Proteins in Living Things
- Lists and Index
- Contributors
- Reviewers
- Contents in Alphabetical Order
- Selected Abbreviations and Acronyms
- Index